Ford Focus Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi

I am in the process of rebuilding a 2003 SVT 2.0L Zetec VVT (170PS) Cylinder Head and I have 1 damaged Tappet Valve Bucket (Camshaft Bucket) Size 11.7456500 Part Number 2M5Z-6500-EA (Stamp Bucket 11775 (P530) if anyone has one available I would be grateful if you could sell it to me so I can get my car back on the road.

Measurement Top Bucket
.464’
11.745mm

Thanks John
 

·
Registered
Joined
·
2 Posts
Hi

I am in the process of rebuilding a 2003 SVT 2.0L Zetec VVT (170PS) Cylinder Head and I have 1 damaged Tappet Valve Bucket (Camshaft Bucket) Size 11.7456500 Part Number 2M5Z-6500-EA (Stamp Bucket 11775 (P530) if anyone has one available I would be grateful if you could sell it to me so I can get my car back on the road.

Measurement Top Bucket
.464’
11.745mm

Thanks John
I have quite a few. I'd have to mic them to see if I have the exact one you need. I have many SVT parts, including a whole car, if anyone is interested. It's the same as your car.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
I have quite a few. I'd have to mic them to see if I have the exact one you need. I have many SVT parts, including a whole car, if anyone is interested. It's the same as your car.
Hi Ayegor
I still require a camshaft bucket * if you have any camshaft buckets that are the following sizes when you mic them up I would be interested. They need to be in good condition no rust and the top of the bucket needs to be in good condition. I have a few that are average and one mentioned above that has gone through the hardening. You should see a laser etched marking on the underside of the bucket you will need to view them in sunlight to see marking.

DescriptionSize (mm)Imperial
Tappet Valve Bucket11.5650.4553'
Tappet Valve Bucket11.6250.4576'
Tappet Valve Bucket11.6850.4600'
Tappet Valve Bucket *11.7450.4635'
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
Hi
Hi Ayegor
I still require a camshaft bucket * if you have any camshaft buckets that are the following sizes when you mic them up I would be interested. They need to be in good condition no rust and the top of the bucket needs to be in good condition. I have a few that are average and one mentioned above that has gone through the hardening. You should see a laser etched marking on the underside of the bucket you will need to view them in sunlight to see marking.

DescriptionSize (mm)Imperial
Tappet Valve Bucket11.5650.4553'
Tappet Valve Bucket11.6250.4576'
Tappet Valve Bucket11.6850.4600'
Tappet Valve Bucket *11.7450.4635'
Hi Ayegor
Were you able to mic up your camshaft buckets and can you help me.
Thanks John
 
1 - 6 of 6 Posts
Top